Hand Held Products Dolphin 7200, Руководство пользователя

Страница: 35 / 179

C H A P T E R 2 D O L P H I N B A S I C S
35
Laser Engine
The Dolphin 7200 is currently available with four scanning options:
•
Standard range
•
Long range
•
High density scanning
•
No scan engine
The laser engine converts reflected light into a digital pattern that represents the bar
code data. A clear window covers the laser engine to protect it from dust and dirt.
Image Engine
The Dolphin 7200 2D terminal is available with the following imaging options:
•
Standard image engine: scans 2 to 9 in. (5 to 23 cm)
•
High-Density: scans 2 to 4 in. (5 to 12 cm)
•
LX image engine: scans 2 to 15 in. (5 to 38 cm) on low density bar codes
Lanyard Eyelet for Optional Wrist Strap
This feature allows a strap to be attached to the Dolphin terminal so that it can be
conveniently secured around the wrist or hooked on to a belt. Not available on the
Dolphin 7200 RF, the Dolphin 7200 2D or the Dolphin
7200 RS-232 terminals.
Battery Well
The Battery Well is a recessed area on the back of the
Dolphin that holds the 3.6V battery pack.
Reset Switch
The Reset Switch is located inside the Dolphin terminal and is accessible through a
small opening within the battery well. To reset the Dolphin, remove the label covering
the opening and press the reset switch with a small blunt object such as a paper clip.
Infrared Communications Port
The Infrared Communications Port allows the Dolphin to communicate through the
Dolphin HomeBase to a host serial device.
Battery Charging Contacts
When the Dolphin is placed in the main well of the Dolphin HomeBase, the
Dolphin’s battery pack is charged through these contacts.
N O T E
Under normal
circumstances, you
should never need to
reset your Dolphin
terminal.