HOME-ESS-HV-5.3K
Empowering Energy Clean And Affordable
5
2.4 Electrical Requirements
2.4.1 General Requirements
Before connecting cables, ensure that the product is intact. Otherwise, electric shocks or fire may occur.
●
Ensure that all electrical connections comply with local electrical standards.
●
Ensure that the cables you prepared meet local regulations.
●
Use dedicated insulated tools when performing high-voltage operations.
2.4.2 DC Operation
Do not connect or disconnect power cables with power-on. Transient contact between the core of the power
cable and the conductor will generate electric arcs or sparks, which may cause fire or personal injury.
●
Before connecting cables, cut off the power supply if people may contact energized components.
●
Please ensure that the label on the power cable is correct before connecting the power cord.
●
Disconnect all inputs and operate the equipment only after the equipment is powered off.
2.4.3 Cabling Requirements
When routing cables, ensure that a distance of at least 30mm exists between the cables and heat-generating
components or areas. This prevents damage of the insulation layer of the cables.
When the temperature is low, violent impact or vibration may damage the plastic cable sheathing. To ensure
safety, comply with the following requirements:
Cables can be laid or installed only when the temperature is higher than 0℃. Handle cables with caution,
especially at a low temperature.
If the storage environment temperature of the cables is below 0°C, the cables must be stored at room
temperature for more than 24 hours before laying the cables.
2.5 Personal Safety
Wear proper personal protective equipment during operation. If there is a probability of personal injury or
equipment damage, stop the operations and take feasible protective measures immediately.
●
Use tools correctly to avoid hurting people or damaging the equipment.
●
The anti-static gloves must be worn when touching the equipment. Do not wear clothes that can easily
●
Do not touch the shell when the equipment is running, the temperature of the shell is high, which may
cause burns.
●
To ensure personal safety and normal use, it should be grounded reliably before use.
●
When the battery is faulty, the temperature may exceed the burn threshold of the touchable surface.
Therefore, avoid touching the battery.
