HOME-ESS-HV-5.3K
Empowering Energy Clean And Affordable
22
Step 3: Place the base
Place the base along the wall with a recommended mounting distance of 30 mm between the base and the
wall. The center hole of the bracket 2 is aligned with the center of the base. The locking hole of the base is
placed on the right.
Figure 15 Sample of Step 3
Step 4: Install the anti tipping bracket 1
There are threaded holes on the back of the BDU. Using the M4x10 screws to install the anti tipping bracket 1
(the shorter) to it.
Figure 16 Sample of Step 4
Step 5: Install the battery
Install the module and BDU in order from bottom to top. Make sure the locking holes of the anti-tipping
bracket overlap from the side, if not, you need to re-adjust the position of the battery to make it overlap.
Figure 17 Sample of Step 5
