HOME-ESS-HV-5.3K
Empowering Energy Clean And Affordable
17
4.1 Installation Note
Please read and understand this section carefully before installing the product!
4.1.1 Personnel Qualification
Product installers should have received safety technical training, obtained the local electrician certifications
and the authorized qualifications for product installation. And installers should be familiar with electrical
equipment, accumulate relevant experience and have the following capabilities, including but not limited to:
●
Setup, startup, shutdown, grounding, short-circuiting and repair of electrical equipment.
●
Standardized maintenance and use of protective tools for electrical equipment.
●
Providing emergency assistance for the injured.
●
Complying with local laws, regulations, standards and directives.
4.1.2 Installation Environment
Please make sure the installation location meets the following conditions
：
●
The building is designed to withstand earthquakes.
●
The floor is flat and hard, and the area has minimal dust and dirt.
●
The ambient environment is cool, dry, well-ventilated, and away from the sea, salt water, humid air, heat
sources as well as direct sunlight.
●
Temperature and humidity are kept at a constant level.
●
There are no flammable and explosive items, corrosive gases, including ammonia and acid vapors, and
contaminants.
Note:
If the ambient temperature exceeds the operating range, the battery system will stop working to
protect itself. The optimal temperature range for battery operation is 15°C to 35°C. Frequent exposure to
inappropriate temperature may reduce battery performance and life.
Figure 8 Sample of Installation Environment
4
Installation
