[文件標題]
[日期]
35
Vol. 1.2 © 2020 Hanbell Precise Machinery Co., Ltd.
All rights reserved
6. Compressor lifting and installation
6.1 Compressor lifting
1.
When lifting compressor, it is recommended to use steel chain or cable as figure 6.1, or other safety
ropes with loading capacity 2500kg.
2.
Make sure the steel chain or cable are properly positioned and keep the compressor in horizontal
level to prevent damage in compressor and its accessories during installation.
Figure 6.1 Lifting compressor
6.2 Compressor installation
1.
Compressor should be mounted close to power supply and keep it under proper ventilation and low
humidity condition.
2.
Make sure the frame that supports compressor is strong enough to resist possible vibration and noise
during operation and reserve at least 600mm service space around compressor.
3. Compressor has to be installed in horizontal position and installation cushion pad is also
recommended, as figure 6.2.
Remark: Compressor should be installed at higher position than evaporator and compressor-foot
position should be higher than ECO liquid level in order to prevent pressure loss on liquid return.
