5
Installation (continued)
Securing the fixture
□
Install the rubber washers (DD) and secure the fixture
to the Mounting Plate by tightening the decorative nuts (EE).
7
Turning the power on
□
Turn the power on at the circuit breaker or replace the fuse.
8
Installing the fixture
□
Gently align the quick-connect pins to the top holes
on the terminal block.
□
Make sure the screws on the Mounting Plate (BB)
are also aligned.
□
Push the fixture back plate to the Mounting Plate (BB).
Make sure that the threaded screw ends are coming
out through the front side of the fixture back plate.
6
Terminal Block
Quick-connect pins
(DD)
(EE)
Threaded screws
Fixture back plate
Hand tighten
finials only.
Do not use any
tools as over
tightening
may cause
damage to the
fixture housing.
NOTE: Use
caulking/silicone
sealant around
the Mounting
Plate to seal.
BB
