4
Installation
Turning off the power
□
Turn the power OFF at the switch
and fusebox or the circuit breaker.
1
Removing the mounting plate
□
Unscrew the Decorative Nuts (EE), remove
the Washers (DD) and keep them for Step 7.
□
Remove the Mounting Plate (BB).
2
3
Identifying the wires
□
Identify the wires at the junction box (Black-line voltage,
White-neutral, Green-ground).
□
Make them accessible for easy connection.
Installing the mounting plate
□
Attach the Mounting Plate (BB) to the outlet box
using the provided Junction Box Screws (CC).
□
Make sure to run the house wires through the
center hole on the Mounting Plate (BB).
4
Connecting the wires
□
Connect the house wires directly
to the terminal block.
□
Tighten the screws on the
terminal block using a screw
driver to secure the wire
connections.
See below.
5
Terminal Block
Black
wire to
“L” input
Ground
wire to
“GND” input
White
wire to
“N” input
Black
Ground
Mounting
Plate
BB
BB
CC
EE
DD
AA
Junction Box
White
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
