Table of Contents
Safety Information
For your safety, always remember to:
□
Turn off the power supply at the fuse or circuit breaker box
before you install the fixture.
Ground the fixture to avoid potential electric shock and to ensure
reliable starting.
Double-check all connections to be sure they are
tight and correct.
Wear rubber soled shoes and work on a sturdy
wooden ladder.
Account for small parts and destroy packing material, as these
may be hazardous to children.
WARNING:
RISK OF SHOCK.
House electric current can
cause painful shock or serious injury unless handled properly.
CAUTION:
Turn off the main power at the circuit breaker
before installing the fixture, in order to prevent possible shock.
NOTICE:
All electrical connections must be in accordance with local
and national standards, National Electric Code (N.E.C.) in the US and
Canadian Electrical Code (C.E.C.) in canada. If you are unfamiliar with
proper electrical wiring connections obtain the services of a qualified
electrician.
Remove the fixture and the mounting package from the box and make
sure that no parts are missing by referencing the illustrations on the
installation instructions.
FCC STATEMENT
Limited Warranty
This fixture is designed for use in a circuit protected by a fuse or
circuit breaker. It is also designed to be installed in accordance with
local electrical codes. If you are unsure about your wiring, check your
local electrical code or consult a qualified electircian.
□
□
□
□
2
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation
between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
Feit Electric Company, 4901 Gregg Road, Pico Rivera, CA 90660. www.feit.com.
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tools Required
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hardware Included
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Color Changing Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 6
This product is warrantied to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so,
please contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
MIN 90 ºC SUPPLY CONDUCTORS
