6
Installation (continued)
Installing the mounting bracket
4
EE
B
Secure the mounting plate (B) to the outlet box with machine
screws (EE).
Installing the track to the ceiling
5
F
AA
Place the linear track section (F) in the desired location on the mounting plate (B) between the two track mounting screws (A).
Mark the location of the track section (F) on the ceiling with a pencil (not included) through the mounting holes in the bottom of the
track section (F).
Attach the track section (F) to the desired location on the ceiling in one of the following ways:
Drill a 5/8 in. hole at each mark on the ceiling.
Insert toggle bolts (AA) through the track section (F), and
thread 1/2 in. toggle onto bolts.
Place the track section (F) against the ceiling, and insert the
toggle bolts (AA) into the holes until the springs open.
Tighten the bolts (AA).
5a
NOTE:
Toggle bolts (AA) should be used for standard installation into drywall, drop ceiling, or suspended ceiling
applications. Anchors (CC) are used for masonry installations ONLY.
Toggle bolt installation
□
□
□
□
□
□
□
□
□
Align the holes in the mounting plate (B) with the holes in the
outlet box.
B
F
A
5b
Anchor installation
6
BB
F
CC
Drill a 7/32 in. hole at each mark on the ceiling, and insert
the anchors (CC) into the mounting surface.
Insert the Phillips screws (BB) through the track section (F),
and tighten to the anchors (CC).
Attaching the mounting plate to the track
□
□
□
Tighten the track mounting screws (A) to secure the track
section (F) to the mounting plate (B).
