![background image](http://html.mh-extra.com/html/hampton-bay/carrison-499-461/carrison-499-461_owners-manual_588011010.webp)
7.
Rubber
washer
Blade
arm
Blade
Screws
Figure 13
Figure 14
Motor
Blade arm
Slot
Tab
Attaching the Fan Blades
Step 1
Attach blades to blade arms using three
screws and rubber washers.
Start a screw
into the
arm, do not tighten. Repeat for the
2 remaining screws and washers.
Step 2
Tighten each screw securely starting with
the center screw. Make sure the blade is straight.
(Fig. 13)
blade
Repeat steps for the remaining blades.
Step 3
Fasten the blade arms to the motor by
inserting the tab from the blade arms to the slot in
the bottom motor housing, then tighten the two
screws and washers already installed in the blade
arms. (Fig. 14)
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE ARMS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.
CAUTION:
Remove the screws from the
motor support plate, discard the motor
support plate and screws. (Fig. 12)
Motor support
plate
Screws
Figure 12