8.
Installing the Switch Housing
Step 1.
Remove 1 of the 3 screws from the mounting ring and loosen the other 2 screws. (Do
not remove)
Step 2.
Place the key holes on the switch housing over the 2 screws previously loosened from
the mounting ring, turn switch housing until it locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws previously loosened and the one previously removed.
(Fig. 15)
Step 3.
S
nap together the wire connection plugs.
Switch
housing
Mounting ring
Screws
Wire connection
plugs
Figure 15