Restore power to ceiling fan and test for proper
operation.
Speed Pull Chain Operation:
This pull chain controls the fan speed as follows;
:
1-Pull = High Speed
2-Pulls = Medium Speed
3-Pulls = Low Speed
4-Pulls = Fan Off
The reverse slide switch located on the side of the
switch housing controls the direction of the blade
rotation:.
Speed settings for warm or cold weather depend on
factors such as room size, ceiling height and number
of fans, etc.
NOTE:
Wait for the fan to stop before changing the
setting of the slide switch
Warm weather (Forward) A downward airflow
creates a cooling effect as shown in Figure 19. This
allows you to set your air conditioner on a warmer
setting without affecting your comfort.
Cool weather (Reverse) An upward airflow moves
warmer air off the ceiling area as shown in Figure 20.
This allows you to set your heating unit on a cooler
setting without affecting your comfort.
Operating your Fan 10.
Figure 19
Figure 20
Fan without Light Kit
1.
lease keep the nut and washer
for install the plug to the switch housing)
3. olding the
under your fan,
snap together the wire connection plugs.
4.
Disassemble the switch housing from the
light kit (p
,
you can keep the light kit for future use.
2. Attach the plug to the switch housing with
the washer and nut previously removed.
(Fig. 18)
H
switch housing
(Fig. 18)
Install the switch housing to the mounting
plate with screws provided. (Fig. 18)
Figure 18
Switch
housing
Washer
Nut
Plug
Connectors
Screws
Mounting plate
