13
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Operating Your Fan
Assembly - Assembling the Fan Without the Light Kit
Assembling the fan without the
light kit
14
□
Remove the three light kit mounting screws (VV) from the
switch cup cover (WW) of the light kit fitter assembly (E).
□
In order to use the fan without light kit, remove the switch
cup cover (WW) from the top of the light kit fitter assembly
(E) by removing the center hex (YY) inside the switch cup
cover (WW), and then thread the switch cup cover (WW)
off the threaded nipple on the top of the light kit fitter
assembly (E).
□
Press the plastic plug (FF) (provided) into the center hole
of the switch cup cover (WW).
□
Position the switch cup cover (WW) onto the switch cup
below fan motor assembly (D) and re-install the three light
kit mounting screws (VV) that were removed in the first
step.
□
Attach the pull chain extension (EE) provided to the fan
pull chain.
The pull chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, and 4 pulls - Off
Speed settings for warm or cool weather depend on factors such as
room size, ceiling height, number of fans, and so on.
The slide switch controls the direction: forward (switch left) or reverse
(switch right).
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting without
affecting your comfort.
NOTE:
Wait for the fan to stop before reversing the direction of the
blade rotation.
D
VV
WW
FF
WW
YY
E
EE
