11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Fastening the blade assemblies to
the motor
11
□
Fasten the blade assembly to the fan-motor assembly (D)
by inserting the alignment post into the slot on the bottom
of the motor and tightening the blade bracket (H) screws.
The blade bracket screws are pre-installed into the blade
bracket (H).
□
Repeat this step for the remaining blade assemblies.
□
Replace the rubber plug (HH).
WARNING:
Replace the rubber plug (HH) to prevent water from
entering the switch housing and to reduce the risk of fire,
electric shock, or other personal injury.
IMPORTANT:
Remove the rubber plug (HH) on the switch cup
(RR) below the motor in order to remove the shipping retainer
(OO) on the bottom of the motor assembly.
D
H
KK
RR
HH
Assembly - Attaching the Fan Blades (continued)
Removing shipping retainer
10
□
Remove and save the rubber plug (HH) in the access hole (KK)
of the switch cup (RR) below the motor assembly (D).
□
Insert the screw driver through the access hole (KK) and
remove the five shipping retainer screws (PP). Rotate the
shipping retainer (OO) as needed to remove the screws.
□
Remove and discard the shipping retainer (OO) and shipping
retainer screws (PP).
D
PP
KK
HH
OO
IMPORTANT:
The switch cup (RR) has an access hole (KK) to
allow the screwdriver to reach the shipping retainer screws
(PP).
IMPORTANT:
The switch cup (RR) has an access hole (KK)
to allow the screwdriver to reach the screws on the blade
bracket (H).
