Assembly — Attaching the Misting Device (continued)
12
13
Installing the pump
Connecting the water at the source
LL
KK
I
HHH
FFF
EE
GGG
GG
NOTE:
Other plumbed water connections are possible using
1/4 in. PTC (push-to-connect) or compression fittings. It is
recommended a professional plumber is consulted and that a
valve is placed in-line to allow for shut-off to the misting
system.
□
Remove the fixed secure ring (GGG) from the hose
connector (GG) and attach the 7 ft. water tube (EE)
into the faucet connector (GG). Reinstall the fixed
secure ring (GGG).
□
Attach the hose connector (GG) to the hose spigot
(HHH).
□
To separate the hose water tube (EE), you
MUST
PRESS DOWN
the
FIXED RING
(FFF) on the bottom of
the faucet connector (GG).
□
The pump should be installed at a level higher than
the water supply and less than 8 ft. vertical distance
from the fan.
□
Attach the two anchors (KK) and pump mounting
screw (LL) to the wall.
□
Hang the pump (I) on the wall.
17
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
