Drawbars & Percussion
50
PIPE Edit Menu - Page 2
From the previous screen, touch the PAGE RIGHT Touch Button once. Page 3 of the PIPE Edit Menu should now
display. The legend below the word “CHIF” (Chiff) should now be blinking.
Pipe Voice Chiff
This Advanced Feature allows you to set the amount of Chiff or attack for each individual Pipe Voice.
What Is “Chiff?”
There are two classifications of organ pipes based on the method used to produce sound. “Flue” or “labial” pipes produce
sound by means of sending a stream of air through the body of the pipe, while “reed” or “lingual” pipes utilize a beating reed
in a manner similar to a reed instrument such as a clarinet.
A flue pipe can be voiced in such a way so that a short attack transient is heard at the onset of the tone. The term, “chiff,”
was coined by pipe organ makers to describe the sound. The amount of chiff can vary depending on the maker and the effect
desired - some organ builders voice the flue pipes with little or no chiff while others, perhaps influenced by the “neo-
baroque” school of organ building, deliberately strive to include the chiff effect.
Select the Chiff setting you want by doing the following:
Turn the VALUE Rotary Control to the
right
to add
more
Chiff to the selected Pipe Voice.
Turn the VALUE Rotary Control to the
left
to add
less
Chiff to the selected Pipe Voice.
From the previous screen, touch the PAGE RIGHT Touch Button once. The legend below the word “CUTOFF”
should now be blinking.
Pipe Voice Cutoff
This Advanced Feature allows you to set the brightness of each individual Pipe Voice by setting its Filter Cutoff point.
Select the Cutoff setting you want by doing the following:
Turn the VALUE Rotary Control to the
right
to make the selected Pipe Voice
mellower
.
Turn the VALUE Rotary Control to the
left
to make the pitch selected Pipe Voice
brighter
.
Содержание Sk-series
Страница 1: ... 73 88 DRAWBARS PERCUSSION ...
Страница 2: ......