Hammond Sk-series, Руководство пользователя

Страница: 14 / 60

Drawbars & Percussion
12
Finally, here is how to add a Pedal or Bass registration.
TRY THIS:
1. Touch the PEDAL Touch Tab in the DRAWBAR SELECT Touch Tab section to turn it “ON” (red LED lit).
2. Create a Pedal Drawbar registration - for example, 60 0000 000. You can confirm the registration by
consulting the Information Center Display.
NOTE: As explained on page 13, the Pedal tones are created by using ONLY the first brown
Drawbar and the first white Drawbar.
Sk-1, Sk1-73, Sk1-88:
3. Touch the MAN. BASS Touch Button to transfer the Pedal tones to the manual and play some notes on the left
end of the manual. You will now hear the notes play with Pedal tones added.
Sk-2:
3. Touch the MAN. BASS Touch Button to transfer the Pedal tones to the Lower Manual and play some notes
on the left end of the Lower Manual. You will now hear the notes play with Pedal tones added.
Ë Sk1, Sk1-73, Sk1-88 - Please Read:
Drawbar parameter changes for the Lower Manual (“L”) will not be heard unless the SPLIT Touch Tab is “ON” and notes
are played below the Split point.
Ë All Sk-series instruments - Please Read
On ALL Sk-series instruments, Drawbar parameter changes for the Pedal department (“P”) will not be heard unless the
MAN. BASS Touch Tab is “ON” or a MIDI Pedal clavier is connected.
Notice that only two (2) Drawbar settings are shown for the Pedals in the Information Center Display. On most Hammond
Organs with two manuals and pedals, there are two Drawbars for controlling the Pedal tones - one at “16'" pitch and the other
at “8'” pitch. The Sk-series recreates this by using the Sub-Fundamental Drawbar (marked “16'”) and the Fundamental
Drawbar (marked “8'”) to control the Pedal sounds.