Hammond Sk PRO, Справочное руководство

Страница: 99 / 624

Combinations
81
t Selecting a Patch within a Combination
Although as we have seen, not all Voice Groups will be active when a Combination has been selected, each
Combination will contain information for each of the Voice Sections. This means that even though a
Combination may have only one Voice Section active, you can turn other Voice Sections “ON” using the
ALLOCATE buttons and you will hear a Patch from each Voice Section appropriate for the selected Patch.
TRY THIS:
1. After the power to the SK PRO has been turned “ON,” press the PLAY button so that the
Information Center Display looks like this:
As explained previously, this is PLAY Mode. We will use F001 as the starting point since it is the
Combination shown when the SK PRO is first turned “ON.”
2. From the screen shown above, press the PIANO ALLOCATE button. The Information Center
Display will now look like this:
Notice the ORGAN ALLOCATE button is now “OFF.” Only the PIANO Patch will now sound.
Notice also the small letter “E” at the top. This is an abbreviation for “EDIT,” and indicates that you have
edited or changed the Combination from its factory setting. Changes to Factory Combinations will not
be remembered unless they are Recorded as User Combinations. This will be covered later in the
Chapter.
HA<O>
SK PRO Reference Guide