Hammond Sk PRO, Справочное руководство

Страница: 418 / 624

Multi Effect 1
400
From the screen shown on the previous page
, press the DIRECTION “ q ” button once.
The box to the right of “FREQ” should be highlighted.
RES - Ring Modulator Frequency
This Parameter allows you to adjust the central frequency of the Ring Modulator effect. You can select from
0 (lowest frequency) to 127 (highest frequency).
Turn the VALUE knob to the right to increase the frequency.
Turn the VALUE knob to the left to decrease the frequency.
From the above screen, press the DIRECTION “ q ” button once.
The box to the right of “MIX” should be highlighted.
FREQ - Ring Modulator Mix
This Parameter allows you to adjust the volume balance between the “dry” and the effect sounds. You can
select from 0 to 127. At 0 only the “dry” sound is heard. The effect level becomes greater as the value
increases. At 64 the ratio between the “dry” and the effect sounds becomes 1:1. At 127” only the effect sound
is heard.
Turn the VALUE knob to the right to emphasize the Effect Sound.
Turn the VALUE knob to the left to emphasize the Dry Sound.
Turn the VALUE knob to make your selection.
HA<O>
SK PRO Reference Guide