Hammond Sk PRO, Справочное руководство

Страница: 352 / 624

CUSTOM SETS - Tone Wheel
334
TONE WHEEL ORGAN TYPES & CUSTOM SETS
Organ Type Custom Set Description
A-100 F1: #35564
F2: Shiny
F3: Mixture A-102, serial number #35564.
Leakage tones with even overtones.
Harmonized leakage tones.
B-3 F1: A27563
F2: #364839
F3: Mixture. B-3, serial number #A27563.
B-3, serial number #364839.
Harmonized leakage tones.
C-3 F1: C155596
F2: Shiny
F3: Mixture C-3, serial number #C155596.
Leakage tones with even overtones.
Harmonized leakage tones.
Mellow F1: Full Flats
F2: Husky
F3: Flute Lead Pure sine waves, all frequencies sounding at the same volume.
Pure sine waves with a slight bass and mid-frequency boost.
Pure sine waves with reduced bass and treble, the opposite of “Husky.”
Turn the VALUE knob to make your selection.
From the screen shown at the bottom of the previous page, press the PAGE “ u
”
button once. Page 2 of the
CUSTOM EDIT - TONE WHEEL FUNCTION Mode should now display. The Information Center Display
should look like this:
t FOLD BACK
On the earliest model Hammond Organs, the Sub-Fundamental Drawbar (the one marked, “16'”) would continue
to play all the way down to the lowest "C" ("1C"). Newer models such as the Hammond Models X-66, X-77 and
Concorde do the same, however, the 8th harmonic Drawbar (the one marked “1'”) continues to play up the
manual to the next to highest "C" ("5C") on the manual.
On a B-3, the lowest note produced by the Sub-Fundamental Drawbar is the 2nd "C" ("2C") from the left end of
the manual, while the highest note that can be played by the 8th harmonic Drawbar is the 4th "F
<
" from the left
end of the manual. The lower and higher keys on the manual "Fold Back,” in that they repeat the pitches played
by other notes.
This Parameter allows you to set the Upper and Lower frequency limits of the Drawbars.
Use the DIRECTION “
t
” and “
u
” buttons to select either “LOW” or “HIGH.” “LOW” refers to the lower limit of
the Sub-Fundamental Drawbar while “HIGH” refers to the upper limit of the pitches called up by the high-
pitched Drawbars (the last four Drawbars). The selected parameter will be highlighted.
Turn the VALUE knob to the right to move the Fold Back point higher.
Turn the VALUE knob to the left to move the Fold Back point lower.
HA<O>
SK PRO Reference Guide