Hammond Sk PRO, Справочное руководство

Страница: 419 / 624

Multi Effect 1
401
From the screen shown at the bottom of the previous page, use the DIRECTION “ u ” and “ p ” buttons to
highlight the box to the right of “LFO WAVE.”
LFO WAVE - Ring Modulator Waveform
This Parameter allows you to select which waveform will be used to modulate the Ring Modulator effect. The
data chart below shows the options you may select.
Drawbar Ring Modulator Wave Options
Description Function
Triangle Triangle wave, which will change the sound smoothly from high to low to high.
SQR Square wave, which will cause the filter to rise and fall suddenly.
SAW Ascending Sawtooth wave, which will cause the filter to rise suddenly and fall gradually.
S&H Sample & Hold, which will cause the filter to rise and fall randomly.
NOTE: The SOURCE must be set to LFO in order for this Advanced Feature to function.
Turn the VALUE knob to make your selection.
From the above screen, press the DIRECTION “ q ” button once.
The box to the right of “LFO RATE” should be highlighted.
LFO RATE - Ring Modulator Rate
This Parameter allows you to adjust the rate of the Ring Modulator effect. You can select from 0 (slowest rate)
to 127 (fastest rate).
NOTE: The SOURCE must be set to LFO in order for this Advanced Feature to function.
Turn the VALUE knob to the right to make the rate faster.
Turn the VALUE knob to the left to make the rate slower.
HA<O>
SK PRO Reference Guide