Hammond A-162, Руководство пользователя

Страница: 93 / 122

93
MIDI
NOTE: The velocity of the PEDAL External Zone (PXZ) is fi xed at
OFF since the Pedalboard of this organ has no velocity
sensing function.
EXPRESSION - MINIMUM
EXPRESSION - MAXIMUM
Th ese allow you to widen or narrow the volume range of
the Expression Pedal for the External Zones.
NOTE: These settings DO NOT aff ect the internal organ (Draw-
bar) tones.
With many types of external sound gear, the volumes do
not react the same. Th
is parameter allows a smooth and
equal fl ow in the Expression Pedal.
You can select 0 - 63 by MIN, and 64 - 127 by MAX.
EXPRESSION - CONTROL NUMBER
Th is is for setting the MIDI continuous Control Number
of the Expression Pedal.
Depending on your external equipment, it may respond to
CC#7 (Volume) or CC#11 (Expression). Th
is parameter
allows you to make that choice.
NOTE: All the parameters in these modes are Preset Parameters.
They can be recorded to the Combination Presets. See the
Appendix for details of the Preset Parameters.

PANIC FUNCTION and PARAMETER RE-
LOAD
If any problem happens in the MIDI system, it may cause
ciphering (sticking notes). Immediately after external MIDI
equipment is connected to this organ, a glitch or “MIDI
hang-up” may occur. Also with some MIDI equipment a
note may occasionally cipher or “stick on” while playing.
If this occurs, touch PAGE[

]and[

]at the same time.
[All Notes Off ] and [Reset All Controller] will be transmit-
ted to all External Zone MIDI channels (Panic Function)
and all the External Zone settings will be re-sent.
ACTIVATE THE EXTERNAL ZONE CHANNELS
If you wish to use the External Zones, be sure
that the SWITCH setting for each External
Zone you wish to use is “ON.” (P. 65 #18-19).