Hammond A-162, Руководство пользователя

Страница: 62 / 122

 Owner’s Manual
62
DRAWBAR
In this mode, you can set the Parameters relating to the Drawbar sound of each keyboard.
To locate this mode:
1. From either of the PLAY screens, touch the [MENU/EXIT] button. Menu A will display.
2. Touch the [1] DRAWBAR button.

MANUAL DRAWBARS (SWELL and GREAT)
TONE WHEELS (P)
Select the virtual tone wheel set (waveform) for the manual Drawbars.
BType1: The traditional tone wheel sound of the B-3/C-3/A-100.
BType2: This sound includes more leakage noise and fl utter.
Mellow: Transparent sine wave.
Brite: The analog-oscillating sound of the vintage Hammond X-5.
Saw: Sawtooth waveform (Non-Hammond “Combo Organ” Style).
CLICK - ATTACK LEVEL (P)
Th e higher the value, the louder the click volume. At 4 no key click is heard. Also,
when the value is below 4, the attack speed of the Drawbar voices slows.
CLICK - RELEASE LEVEL (P)
Th e higher the value, the louder the click volume. At 4 no key click is heard. Also,
when the value is below 4, the release rate slows.
CLICK - LPF (P)
Th is allows you to set the tone of the Key-Click.
Th e setting range is 0 - 127. Th e larger the value, the brighter the Key-Click.
FOLD-BACK - LOW (P)
Th is allows you to set at which key the 16´ Drawbars starts to FOLD-BACK (repeat
the same notes in a higher octave on the keyboard).
Th
e fi rst key (= the far left playing key on the manual) is displayed as “1C”. Th e set-
ting range is 1C - 2C.
FOLD-BACK - HIGH (P)
Th is allows you to set at which key the 1´ Drawbar starts to FOLD-BACK (repeat
the same notes in a lower octave) in the upper-most range. Th e set range is 4G - 5C.
NOTE: The FOLD-BACK sets not only the 1´ but also the 11⁄3´, 13⁄5´, 2´ and 22⁄3´ Drawbars.
TONE WHEEL SET
Each tone wheel set allow you to make fi ne adjust-
ments. (P. 70)
KEY-CLICK
The “Key Click” is the noise heard every time the
key is touched or released on the B-3/C-3/A-100,
as the voice is generated by mechanically switch-
ing the key contacts. The function on this model
simulates the Key Click.
Time
Loudness
Attack
Rate
Release
Rate
Attack
Click
Release
Click
Note On Note Off
EXAMPLES OF KEY CLICK SETTINGS
Simulating the multi-contact keyboard represent-
ed by the B-3/C-3/A-100: AT=8, RL=8
Simulating a PCM synthesizer where only the At-
tack produces a Key Click: AT=8, RL=4
Simulating the quieter key contact system repre-
sented by the X-66: AT=4, RL=4
The slow envelope like the pipe organ: AT=0, RL=0
FOLD-BACK
As the number of the tone wheels was limited
on the B-3/C-3/A-100, the organs were designed
to repeat the same octave in the upper-most and
lower-most range. This feature reproduces this
characteristic.