TRANSMISSION (MAIN GEARCASE)
Always check and change the fluid at the intervals outlined in the Periodic
Maintenance Chart section. HAMMERHEAD recommends the use of AGL
Gearcase Lubricant & Transmission Fluid for this vehicle.
FLUID CHECK
NOTE
Maximum transmission fluid volume cannot exceed 25oz. (750ml). Fill / check
method is not fill to spill. Follow Fluid Change Procedure to verify transmission
is filled with fluid.
The fill plug is located on the rear of the gearcase. Maintain the fluid level at the
bottom of the fill plug hole.
1. Position the vehicle on a level
surface.
2. Remove the fill plug
q
.
3. Check the fluid level.
4. Add the recommended fluid as
needed.
5. Reinstall the fill plug.
FLUID CHANGE
The drain plug is located on the right-hand side of the transmission.
1. Remove the fill plug.
2. Place a drain pan under the drain plug.
3. Remove the drain plug. Allow the fluid to drain completely.
4. Clean the drain plug.
5. Reinstall the drain plug with a new o-ring. Torque to 14 ft. lbs. (19 Nm).
6. Refill with .75 L / 25 oz of recommended gear oil. Do NOT overfill or fill to the
bottom of the fill plug hole.
7. Reinstall the fill plug.
53
