Hammer HS 950, Руководство пользователя

Страница: 30 / 60

30
X
!
"
!
X
Y
!
"
!
Edge sanders
HS 950
Setting: Distance of the roller to the side working table
1. Loosen the hexagonal screws.
2.
Move the clamp along the slotted holes.
3. Tighten the hexagonal screws.
!
Socket head cap screw
"
clamp
Setup and installation
Setting: 90° angle of the roller to the side working table
Angle A:
1.
Place a 90° angle between the roller and the side
work table.
2. Measure the distance Y and X . The values X and Y
must be equal.
3. Loosen the hexagonal screws.-
Release the fixing screws
Setting - at X>Y:
•
Adjusting in the „-“ direction
Setting - at X<Y:
•
Adjusting in the „+“ direction
4. Tighten the hexagonal screws.
Tighten the fixing screws
!
Socket head cap screw
"
Fixing screws
#
clamp
Fig. 7-11: Setting - side working table
Fig. 7-12: Setting - Angle A
Attention! Risk of material damage!:
Set the working table with sufficient distance to the sanding belt! There is the risk of collision.