25
Edge sanders
HS 950
Transport, packaging and storage
6.5 Storage
Keep items sealed in their packaging until they are
assembled/installed and be sure to observe the stacking
and storage symbols on the outside of the packaging.
Store packed items only under the following conditions:
•
Do not store outdoors.
•
Store in a dry and dust-free environment.
•
Do not expose to aggressive substances.
•
Protect from direct sunlight.
•
Avoid subjecting the machine to shocks.
•
Storage temperature: –10° to +50 °C
•
Maximum humidity: 60 %
•
Avoid extreem temperature fluctuations (to prevent
build-up of condensation).
•
Apply a coat of oil to all machine parts open to
possible rusting (corrosion protection).
•
When storing for a period longer than 3 months,
apply a coat of oil to all machine parts open to
rusting (corrosion protection). Regularly check the
general condition of all parts and the packaging. If
necessary, refresh or re-apply the coat of
anti-corrosive agent.
•
If the machine is to be stored in a damp environment,
it must be sealed in airtight packaging and
protected. (desiccant).
6.3 Transport inspection
Upon arrival, inspect the shipment to ensure that it is
complete and has not suffered any damage.
If any transport damage is visible, do not accept the deli-
very or only accept it with reservation. Record the scope
of the damage on the transport documents/delivery note.
Initiate the complaint process.
6.4 Packaging
If no agreement has been made with the supplier to take
back the packaging materials, help to protect the environ-
ment by reusing the materials or separating them accor-
ding to type and size for recycling.
Attention! Dispose of the packaging materials in an environmentally friendly way and always in accordance
with local waste disposal regulations. If applicable, contract a recycling firm to dispose of the packaging
materials.
Note: Help preserve the environment! Packaging materials are valuable raw materials and in many cases
they can be used again or expediently reprocessed or recycled.
For all defects that are not discovered upon delivery, be
sure to report them as soon as they are recognised as
damage claims must be filed within a certain period, as
granted by law.
Содержание HS 950
