© 2018 mPTech
. All rights reserved. Hammer ACTIVE 2
11
To insert the memory card correctly, turn off the device, open the waterproof
seal
(8)
with your fingernail, slide out the tray, and then precisely place the
microSD card (instead of one of the SIM cards) on it as shown in the cut-outs
and picture
(16).
Then carefully and gently insert the tray into place and close
the
gasket
securely.
Use only memory cards recommended by the manufacturer. Pay attention to
the selection of the proper format-the microSD card, capacity and type/class.
Incompatible memory cards may damage the device and cause the stored data to
be destroyed as well. Incompatibility of memory card can be caused, among others,
by an incorrect card format (required format microSD) or an unsupported card
capacity - above the value recommended by the manufacturer.
7.2 Charging the battery
Charge the battery before the first use. The battery should be charged by the
attached charger or another charger, intended for this type of equipment. If in
doubt contact the seller or manufacturer service. Use only chargers and wires
recommended by the manufacturer. Using incompatible chargers or cables can
cause explosion of the battery or damage to your device. When the battery is near
a complete discharge, the notification is displayed on a low battery charge.
To continue use of the device charge the battery. If the battery is completely
discharged the device can not be switched on even when the loading process is