manualshive.com logo in svg

Hammer Strength MTSAB, Руководство пользователя

Поделиться
Скачать
Hammer Strength MTSAB Скачать руководство пользователя страница 26

23

7

 

Belt Handling Guide

       Belt  Connections,  Installation,  Tensioning  and  Inspection

MTS belts are required to be installed and maintained following the specifications identified below. Failure to follow 
these specifications can lead to the dislocation of the belt during use and can cause serious injury. Along with securing 
the belt to the headplate, it is important to check the entire unit and ensure that all hardware is securely fastened and 
not left loose upon completion of belt installation.

Use of non certified “techs” note: Service warranties may be void if a non-Life Fitness certified technician performs ser-
vice work. Replacement of any strength belts should be performed by a Life Fitness certified technician.

Belt Installation: Headplate

1.  Place belt-wrapped pin below plates and affix with hardware (bolts, washers and nuts).
2.  Make sure there is a minimum 2” (5.0cm) of spare belt extruding from head plate for future adjustments.
3.  Tighten hardware to 20-25 FT-LBS (27.2 - 34.0Nm).  

Содержание MTSAB




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды