Hammer Strength MTSAB, Руководство пользователя

Страница: 13 / 35

10
21. Foam
ƒ
Three and Four pound EVA foam (deformation resistant) or equivalent is used on all machines. The foam is in-
jection molded directly to the multi-ply wood support board with integral 10 mm T-nuts.
22. Hand Grips
ƒ
Hand grips are an extruded 60-durometer-thermorubber compound that is non-absorbing, wear and tear re-
sistant and exhibits good dry and wet frictional characteristics.
ƒ The grips are retained with aluminum collars, which eliminates the tendency of the grip to slide off the handle.
23. Seat Adjustments
ƒ
Numeric seat and pad adjustments (where appropriate) correctly align body to machine for proper posture,
muscle isolation and body stabilization.
ƒ
Seats adjust in 1/2” (12 mm) increments.
24. Foot Platforms
ƒ Foot platforms are Linex™ covered ensuring slip resistance and long lasting protection against wear.
25. Instructional Placard
ƒ
Visual placards illustrate proper use and muscles trained.
26. Equipment Anchoring
ƒ
All machines have holes in the feet, which allow for easy anchoring to the floor. Hammer Strength recommends
that all machines be anchored to the floor to minimize the possibility that they will be tipped.
27. Liability Insurance
ƒ Certificate of insurance available upon request.