Wireless ADSL2
+
Router
HRDSL150W
User Manual
9
3. Installation & Setup
Follow each step carefully and only go to the next step once you have complete the previous one.
Note!
Be sure that you are well insulated from any power source to avoid electricity shock.
Note!
Use only the manufacturer-approved power supply that shipped with the Router.
1. Connect the power to the Wireless ADSL2+ Router by plugging the power supply into an
appropriate electrical outlet.
2. If the Power LED is off, refer to “Troubleshooting” for information.
3.1 Connection of Wireless ADSL2+ Router
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to any of the 4 Wireless
ADSL2+ Router's LAN Ports.
2. Connect the supplied RJ11 telephone cable from your home's telephone jack to the “
LINE
” port of
the supplied splitter. Connect the other supplied RJ11 telephone cable to the “
DSL
” port of the
splitter and connect the other end of this cable to the “
LINE
” port of your Wireless ADSL2+ Router.
(If there is no option Splitter, please connect the supplied RJ11 telephone cable from your home's
telephone jack to the “
LINE
” port of your Wireless ADSL2+ Router).
3. Connect a RJ11 telephone cable to the “
PHONE
” port of the splitter and connect the other end to
your telephone.
4. Connect the power adapter to the power inlet “
POWER
” of the Wireless ADSL2+ Router and turn
the “ON/OFF SWITCH” switch of your Wireless ADSL2+ Router on.
