DEFRA Stove Installation and User Guide
The fitting of an extractor fan in the same room as the stove, or
an adjacent room is not permitted. A spillage test will be required
to determine how any extractor fans may affect the required size
of ventilation requirements.
For more detailed guidelines on required ventilation sizes please refer to the
HETAS Guide which can be found on the HETAS website.
If you plan to use an external air supply on a suitable stove, and have bought
the appropriate Arada External Air Supply Kit, please refer to the instructions
included with the kit on how to install it.
The accompanying stove technical product sheet states whether or not your
appliance is compatible with a Direct Air Supply Kit.
2.4
Fitting the flue outlet
The flue outlet spigot may be fitted onto the stove, but will not be fully
tightened.
Figure 1: Fitting the flue outlet for a rear flue configuration.
The flue outlet assembly can be orientated for top or rear flue exit as shown
in figure 1 and 2 on the following page.
The outlet pipe flange is pre fitted with a gasket rope seal. Additional fire
cement may be added if required.
BK575 Rev03
4