Hamilton Hopper HSH, Руководство пользователя

Страница: 7 / 28

Document #101-0240 7 04/22/2013
IV. LOADING AND UNLOADING
To Fill Hopper
To fill the Hopper with coins, tilt the Hopper partially towards you and insert the Hopper Load Rivet through
the hole in the Hopper bracket. (Refer to Diagram A on page 12). Pour coins into the top of the Hopper. Hop-
per may also be removed to be filled as well. Note: Hopper will become heavy when attempting to put Hopper
back in machine. Note: When filling hopper make sure the coin baffle is pushed down.
CAUTION! Use only clean , dry coins. Remove all debris from coins before
loading into Hopper.
To Empty Hopper
Tilt the Hopper all the way towards you and dump the coins into a container. Note: This process can make the
container heavy and hard to handle. Therefore, turn off power to machine,and disconnect harness. Then tilt
hopper back, while tilting back lift hopper rod out of hopper bracket. With the container on the floor dump
coins into container.