COMMANDER
INSTALLATION MANUAL
5
Introduction
Introduction
PLEASE READ THIS MANUAL IN ITS ENTIRETY
PRIOR TO INSTALLATION.
A minimum of two (2) people should be present for installation to minimize risk of injury due to the weight and
size of Commander.
Hamilton is not responsible for any injury caused due to improper installation.
About This Manual
This manual was written to provide general information and guidance for the installation of a Commander
pay station. If you require additional assistance from the manufacturer, you may call
(419) 867-4852
, or
.
When requesting assistance, ensure you have serial numbers readily available. We recommend recording
these numbers in the spaces below for easy future reference:
COMMANDER MODEL & SERIAL #____________________________________________________
CONTROLLER MODEL & SERIAL #____________________________________________________
HOPPER MODEL & SERIAL #________________________________________________________
STACKER MODEL & SERIAL #________________________________________________________
VALIDATOR SERIAL #_______________________________________________________________
LOCK/KEY # _______________________________________________________________________
Warranty Card
A warranty card is included in the documentation provided with Commander. Complete and return this card
to Hamilton within ten (10) days of installation.
Dedicated Power Source
Before installation,
ensure that Commander has its own dedicated power source
. Under no circumstances
should additional equipment be operating off the dedicated power source for Commander.
If a dedicated power source is unavailable, cease installation until one is established.
