Technical Data Sheet
HBH550 – 220-240V
PROPRIETARY RIGHTS NOTICE
This document and all information contained within it is the property of Hamilton Beach Brands, Inc. (HBB). It is confidential and
proprietary and has been provided to you for a limited purpose. It must be returned or destroyed upon request. Disclosure, reproduction or use of this document and
any information contained within it, in full or in part, for any purpose is forbidden without the prior written consent of HBB. No photographs may be taken of any article
fabricated or assembled from this document without the prior written consent of HBB.
4421 Waterfront Drive
Glen Allen, VA 23060
Revision Description:
Corrected for clarification
Request Number:
DOC4244
Revision Date:
11/7/13
Approved by:
DOC4244
Issue Code(s):
L
Page:
2
of
8
Document #:
520006901
Rev:
C
ENG-FRM-RIC-4.32, Rev. E
Repair Guide
Housing Disassembly (See Figure 1.)
-
Turn power switch to the off position and unplug the machine for any repair or
parts replacement.
-
Remove the jar pad.
-
Remove the four screws under jar pad feet.
-
Carefully lift the upper housing off and tilt it towards the front of the machine;
movement will be limited by wires.
Figure 1. Machine Interior
Motor Wiring Details
-
Black motor lead from the non-thermal control device side of the motor routes to
terminal J3 on the Control Board.
-
Black motor lead from the thermal control device side of the motor routes to J4
on the Control Board.
