Hamilton Beach HBFW3205, Руководство пользователя, Страница: 38 / 88

37
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Unsatisfactory
washing result.
Your washing is too dirty for the
program selected.
Use the information in the program tables to select
the most appropriate program.
Amount of detergent used
insufficient.
Use the amount of detergent as instructed on the
packaging.
There is too much laundry in your
machine.
Check that the maximum capacity for the selected
program has not been exceeded.
Unsatisfactory
washing result.
Hard water.
Increase the amount of detergent following the
manufacturer’s instructions.
Your laundry is too tightly packed
together in the drum.
Check that your laundry is spread out.
As soon as the
machine is loaded
with water, water
discharges.
The end of water drain hose is too
low for the machine.
Check that the drain hose is at a suitable height. (**) .
No water appears
in the drum during
washing.
No fault. Water is in the unseen part
of the drum.
. . . . . . . . . . . . . . . . . . . . .
Laundry has
detergent residue.
Non-dissolving particles of some
detergents may appear on your
laundry as white spots.
Perform an extra rinse, or clean your laundry with a
brush after it dries.
Grey spots appear on
the laundry.
There is untreated oil, cream or
ointment on your laundry.
Use the amount of detergent as instructed on the
packaging in the next wash.
The spin cycle does
not take place or
takes place later than
expected.
No fault. The unbalanced load
control system has been activated.
The unbalanced load control system will try to spread
your laundry. The spinning cycle will begin once your
laundry is spread. Load the drum evenly for the next
wash.
(*) See the chapter regarding maintenance and cleaning of your machine.
(**) See the chapter regarding installation of your machine.