Hamilton Beach HBFW3205, Руководство пользователя, Страница: 34 / 88

33
8.2 Water Inlet Filters
Water inlet filters prevent dirt and foreign materials from entering your machine. We
recommend that these filters are cleaned when your machine is unable to receive sufficient
water, although your water supply is on and the tap is open. We recommend that you clean
your water inlet filters every 2 months.
• Unscrew the water inlet hose(s) from the
Washing Machine.
• To remove the water inlet filter from the water
inlet valve, use a pair of long-nosed pliers to
gently pull on the plastic bar in the filter.
• A second water inlet filter is located in the
tap end of the water inlet hose. To remove the
second water inlet filter, use a pair of long-
nosed pliers to gently pull on the plastic bar in
the filter.
• Clean the filter thoroughly with a soft brush and wash with soapy water and rinse
thoroughly. Re-insert the filter by gently pushing it back into place.
CAUTION:
The filters at the water inlet valve may become clogged due to
water quality or lack of required maintenance and may break down. This may cause a
water leak. Any such breakdowns are out of the scope of the warranty.
8.3 Pump Filter
1
3
5
2
4
6
The pump filter system in your Washing Machine
prolongs the life of the pump by preventing lint
from entering your machine.
We recommend that you clean the pump filter
every 2 months.
The pump filter is located behind the cover on the
front-lower right corner.
To clean the pump filter:
1. You may use the washing powder spade (*)
supplied with your machine or liquid detergent
level plate to open the pump cover.
2. Lodge the end of the powder spade or liquid
detergent level plate in the opening of the cover
and gently press backwards. The cover will open.
• Before opening the filter cover, place a
container under the filter cover to collect any
water left in the machine.
• Loosen the filter by turning anticlockwise and
remove by pulling. Wait for the water to drain.