Hamilton Beach HBFW3205, Руководство пользователя, Страница: 17 / 88

16
4.4 PackagIng and EnvIronment
Removal of packaging materials
Packaging materials protect your machine from any damage that might occur during
transportation. The packaging materials are environmentally friendly as they are recyclable.
Use of recycled material reduces raw material consumption and decreases waste
production.
4.5 SavIngs InformatIon
Some important information to get the most efficient use out of your machine:
• Do not exceed the maximum load for the washing program you have chosen. This will
allow your machine to run in energy saving mode.
• Do not use the pre-wash feature for lightly soiled laundry. This will help you save on the
amount of electricity and water consumed.
4.6 Water Inlet Hose Connection
1. Your machine have double water inlet connection (hot and cold) . The red capped hose
should be connected to the hot water inlet.
• To prevent water leaks at the joints, either 1 or 2 nuts (depending on your machine’s
specifications) are supplied in the packaging with the hose. Fit these nuts to the end(s)
of the water inlet hose that connect to the water supply.
2. Connect new water inlet hoses to a ¾ ˝, threaded tap.
• Connect the white capped end of the water inlet hose to the white water inlet valve on
the rear side of the machine and the red capped end of the hose to the red water inlet
valve (if applicable).
• Hand tighten the connections. If in any doubt, consult a qualified plumber.
• Water flow with pressure of 0. 1-1 Mpa will allow your machine to operate at optimum
efficiency (pressure of 0. 1 Mpa means that more than 8 litres of water per minute will
flow through a fully opened tap).
3.
Once you have made all of the connections, carefully turn the water supply on and
check for leaks.
4. Ensure that the new water inlet hoses are not trapped, kinked, twisted, folded or
crushed.
3/4”
10 mm
1 3 2 4