Hamilton Beach 58912-CN, Руководство пользователя

Страница: 10 / 32

10
4. At the end of the blending cycle,
rotate the VARIABLE SPEED DIAL
back to the leftmost position and
press the START/STOP (
) Button
to stop blending. Turn off the Blender
with the RESET/OFF (
I / ) Switch on
the right side of the Base. Unplug
Blender after blending.
5. Remove Blender Jar.
6. Remove Lid while holding blending
Jar securely. Serve.
7. If the Blender runs in empty state,
the recommended times is controlled
for 1 minute, and then leave for 4
minutes to cool, as one cycle. If there
is no short break after running in
empty state, there is a risk of damage
to the blender jar.
After blending nuts or ice cubes, the
surface on inner wall of the blender jar
will have normal wear marks; such wear
depends on the hardness of the food and
the time of blending. After long periods
of use, the surface on inner wall of the
blender jar will have normal wear marks
as well. These are all normal.
Using Manual Mode
(cont.)
w
WARNING Burn Hazard.
Metal parts under
blending Jar get hot
after extended use.