background image

2

IMPORTANT SAFEGUARDS

1. 

Read all instructions.

2. 

This appliance is not intended for use 
by persons with reduced physical, 
sensory, or mental capabilities, or lack of 
experience and knowledge, unless they 
are closely supervised and instructed 
concerning use of the appliance by a 
person responsible for their safety.

3. 

This appliance shall not be used by 
children. Keep the appliance and its cord 
out of reach of children. 

4. 

Close supervision is necessary when any 
appliance is used near children. Children 
should be supervised to ensure that they 
do not play with the appliance.

5. 

To protect against risk of electrical shock, 
do not put cord, plug, base, or motor in 
water or other liquid.

6. 

Turn the appliance OFF ( ); then unplug 
from the outlet when not in use, before 
assembling or disassembling parts, and 
before cleaning. To unplug, grasp the 
plug and pull from the outlet. Never pull 
from the power cord. 

7. 

Avoid contact with moving parts.

8. 

Do not operate any appliance with a 
damaged supply cord or plug, or after 
the appliance malfunctions or has been 
dropped or damaged in any manner.  
If the supply cord is damaged, it must 
be replaced by the manufacturer, its 
service agent or similarly qualified 
persons in order to avoid a hazard. Call 
the provided customer service number 
for information on examination, repair, or 
adjustment 

9. 

The use of attachments, including 
canning jars, not recommended or sold 
by the appliance manufacturer may 
cause a risk of injury to persons.

10. 

Do not use outdoors.

11. 

Do not let cord hang over edge of 
table or counter or touch hot surfaces, 
including stove.

12. 

Do not place on or near a hot gas or 
electric burner, or in a heated oven.

13. 

Keep hands and utensils, other than the 
tamper provided, out of container while 
blending to reduce the risk of severe 
injury to persons or damage to the 
blender. The cover must remain in place 
when using the tamper through the 
cover opening.  A scraper may be used 
but must be used only when the blender 
is not running.

14. 

Blades are sharp; handle carefully—  
especially when emptying or cleaning 
the blender jar.

15. 

Do not use a broken, chipped, or 
cracked blender jar.

16. 

Do not use broken, cracked, or loose 
cutting blade assembly.

17. 

Always operate blender with Lid in place. 
Remove emulsion cup only for adding 
ingredients or to insert the tamper.  
 
 

 

18. 

When blending hot liquids, remove 
emulsion cup and close any edge 
cover opening intended for pouring. To 
prevent possible burns: Do not exceed 
1000-ml level. Hot liquids may push off 
Lid during blending; therefore, with the 
protection of an oven mitt or thick towel, 
place one hand on top of the Lid, keep 
exposed skin away from the Lid, and 
start blending at lowest speed.

19. 

Ensure cutter assembly is tight and 
secure to jar. Injury can result if moving 
blades accidentally become exposed.

20. 

Do not leave blender unattended while it 
is operating.

21. 

Check that the appliance is OFF ( ) 
before plugging cord into wall outlet. To 
disconnect cord, switch to OFF ( ). Then 
remove plug from wall outlet. To unplug, 
grasp the plug and pull from the outlet. 
Never pull from the power cord. 

22. 

Do not use appliance for other than 
intended purpose. 

When using electrical appliances, basic safety precautions should always be followed to 
reduce the risk of fire, electric shock, and/or injury to persons, including the following:

Содержание 58912-CN

































Отзывы: