4
Parts and Features
To order parts, visit:
hamiltonbeach.com/parts
1
Pour Spout
2
Lid
3
Blender Jar
4
Base
5
Control Panel
6
Vent
1
How to Use
Before first use:
After unpacking Blender, wash everything except Base in hot, soapy water. Dry
thoroughly. Wipe Base with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER. Care
should be taken when handling Cutting Blade Assembly as it is very sharp.
IMPORTANT:
Your Blender Jar and Cutting Blade Assembly are subject to wear during normal
use. Always inspect Jar for nicks, chips, or cracks. Always inspect Cutting Blade Assembly for
broken, cracked, or loose blades. If Jar or Cutting Blade Assembly is damaged, do not use. Visit
hamiltonbeach.com/parts.
1.
Make sure Blender is unplugged and Power Switch ON (
I
)/OFF ( ) is in OFF position. Place Base
on clean, dry surface to keep foreign particles from being pulled up into motor during operation.
2.
Place Cutting Blade Assembly, Blade side up, through opening in Blender Jar before twisting Collar
onto bottom of Jar.
3.
Set Jar onto Base, making sure it is securely seated. Jar can be placed on Base in multiple
positions for easy access with left or right hand.
4.
Add liquid ingredients first (at least 8 oz. [238 mL], then other ingredients to Jar. Do NOT fill
ingredients above 48 oz. [1250 mL] fill line.
5.
Plug into outlet. Press Power Switch ON (
I
)/OFF ( ) to ON (
I
) position. When Power Switch is in
ON (
I
) position, Switch will be red.
IMPORTANT:
Do not operate your Blender continuously for long periods exceeding 3 minutes. If
you start to smell a burning odor, stop immediately and remove Blender Jar. Start and run Base
ONLY with NO Blender Jar on highest speed for 2 minutes. When trying similar recipes in the
future, reduce total amount of ingredients.
6.
Before processing food or beverages, ensure that Lid is secured onto Jar and Jar is secured onto
Base. Always place one hand on Lid during operation.
7.
Press desired speed button based on function on Control Panel. When using PULSE Buttons,
Blender will only run when Button is held down.
w
WARNING
Burn Hazard.
When blending hot liquids, open vent opening of lid, and close any lid openings intended for
pouring. If pouring with lid in place, ensure the hinged cap is securely in place. Hot liquids may
push lid off jar during blending. To prevent possible burns: Do not fill blender jar beyond the 3-cup
(710-ml) level. With the protection of an oven mitt or thick towel, place one hand on top of lid.
Keep exposed skin away from lid. Start blending at lowest speed.
8.
ALWAYS press STOP Button to turn Blender off when finished blending, then press Power Switch
ON (
I
)/OFF ( ) to OFF ( ) on side of Blender. Lift Jar to remove. Never place Jar onto unit while
motor is running.
2
3
4
5
6
8
7
9
5
10
7
Cutting Blade Assembly
8
Collar
9
Power Switch ON (
l
)/
OFF ( ) [on right side of
Base] In ON (
l
) position
Switch will be red
10
Cord Storage (back of
Base)
5
9
