background image

 5

4

Other Consumer Safety Information

This appliance is intended for household use only. 

w

 WARNING

 

Electrical Shock Hazard: The length of the cord used on this 

appliance was selected to reduce the hazards of becoming tangled in or tripping 

over a longer cord. If a longer cord is necessary, an approved extension cord 

may be used. The electrical rating of the extension cord must be equal to or 

greater than the rating of the appliance. Care must be taken to arrange the 

extension cord so that it will not drape over the countertop or tabletop where it 

can be pulled on by children or accidentally tripped over.
If the cutting blade assembly locks and will not move, it will damage the motor. 

Do not use. Visit https://hamiltonbeach.global for service center locations or 

kindly take the product to the place of purchase.  
Do not place blender jar in the freezer filled with food or liquid. This can result 

in damage to the cutting blade assembly, jar, blender, and possibly result in 

personal injury
NOTE: This machine is equipped with motor overload protection. If the 

motor stops during operation due to overheating, unplug and allow it to cool 

down for approximately 15 minutes. Plug machine back in to resume normal 

operation.

w

 WARNING

Electrical Shock Hazard

Disconnect power before 

cleaning blender base.
Do not immerse cord, plug, 

or base in water or any other 

liquid.
Failure to follow these 

instructions can result in  

death or electrical shock.

Electrical Shock Hazard

Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can 

result in death, fire, or electrical shock.

w

 WARNING

Cut Hazard

The blending blade is sharp.
Always place lid on container when 

blending.
Do not put hands, spoons, or other 

utensils in container when blending.
Failure to follow these instructions can 

result in broken bones, cuts, or other 

injuries.

Burn Hazard

Always use caution when blending 

hot contents.
Failure to follow these instructions can 

result in burns.

Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that it must be taken over by a selective 

collection system conforming to the WEEE Directive so that it can be either recycled or dismantled in 

order to reduce any impact to the environment. The user is responsible for returning the product to 

the appropriate collection facility, as specified by your local code. For additional information regarding 

applicable local laws, please contact the municipal facility and/or local distributor.

Other Consumer Safety Information - Continued

Содержание B96









Отзывы: