Änderungen vorbehalten / Subject to change without notice
4 9
Description: Sets or returns the input (ground line-)position. The value is given in divisions.
A 0 means the middle of the screen.
Forms:
Command and query.
*RST Value: N/A
Examples:
":inp:pos -4;" (set groundline to screen bottom)
":inp:pos2 2;" (set groundline of ch2 to the 90%-line)
8.3 SENSe Subsystem
8.3.1 :SENSe:AVERage <ON | OFF>;
:SENSe:AVERage?;
Description: Switches the oscilloscope averaging function on or off. Please note
oscilloscope manual.
Forms:
Command and query.
Parameters: ON, OFF.
*RST Value: N/A.
8.3.2 :SENSe:AVERrage:COUNt <f | MAXimum | MINimum>;
:SENSe:AVERrage:COUNt [MAXimum | MINimum] ?;
Description: Sets or returns the rating of each signal recording during averaging
(resolution). Numbers are rounded to 2n.
Forms:
Command and query.
*RST Value: N/A.
8.3.3 :SENSe:AVERrage:TYPE <ENVelope | SCAlar>;
:SENSe:AVERrage:TYPE ?;
Description: Sets or returns whether the signal display should consist of several signal
recordings or not.
ENVelope: MIN and MAX values of several recordings are displayed as an
envelope curve.
SCAlar: Neither an average nor envelope display are selected. Please note
the oscilloscope manual, item Refresh.
Forms:
Command and query.
Parameters: ENVelope, SCAlar.
*RST Value: N/A.
8.3.4 :SENSe:SWEep[:TIME] <f | MAXimum | MINimum> [S];
:SENSe:SWEep[:TIME] [MAXimum | MINimum] ?;
Description: Sets or returns the time base setting (unit: seconds). The parameter is a
floating point number, which describes the total record length (time base
coefficient x 10 = record length) and can be completed by a unit (s, ms, µs).
MAXimum and MINimum enable to set or return the minimum or maximum
record length.
Forms:
Command and query.
Parameters: One floating point, followed by an optional unit specifier (s, ms, s, ...), or
MAXimum or MINimum, which will have the effect of setting the timebase
to the maximum or minimum allowable range. Issuing the query with
MAXimum or MINimum as a parameter will return the maximum or
minimum setting possible.
*RST Value: N/A.
Example:
“:SENSe:SWEep 10µs;“ // sets time base to 1µs/div (record length 10µs/div.)
“:sense:swe ?;“ // query for record length.
Содержание HO79-6
