Hardware accelerated triggering and decoding in real-time
Display data in ASCII, binary, decimal or hexadecimal format
Powerful trigger to isolate specific data packages
Detailed
oom also available for serial bus analysis
Color-coded display of decoded bus signals
Directly export analyzed data to USB flash drive
Add serial bus options to all HMO oscilloscopes with software licence
keys at any time
HOO10
Analysis of I
2
C, SPI and UART/RS-232 signals on analog and logic channels.
Two buses can be analyzed at the same time.
HOO11
Analysis of I
2
C, SPI and UART/RS-232 signals on all analog channels.
Only one bus available for analysis.
HOO12
Analysis of CAN and LIN signals on analog and logic channels for two buses.
Frequency range: 100 kHz to 1.6 GHz / 3 GHz
HMS1010/HMS3010 with tracking generator:
Frequency range: 5 MHz to 1.6 GHz / 3 GHz
Output level: -20 dBm to 0 dBm
Unlock preamplifier option via licence key upgrade (HO3011)*
Spectral purity greater than -100 dBc/Hz (at 100 kHz)
SWEEP from 20 ms to 1000 s
Detectors: auto-, min.- / max.-peak, sample, RMS, average, quasi-peak*
Miscellaneous marker/Δmarker and peak functions
Directly export to USB flash drive, RS-232/USB dual interface for
remote control
Fanless design and fast boot time (less than 8s)
*not available for HMS1000E
This unit is used to measure the voltage standing wave ratio (VSWR) and
reflection coefficient of a device under test with an impedance of 50 Ω.
Frequency range:
100 kHz to 3 GHz
Impedance:
50 Ω
Directivity:
>
28 dB (100 kHz to 300 kHz)
>
35 dB (300 kHz to 1 GHz)
>
30 dB (1 GHz to 3 GHz)
Reflection loss at DUT port:
>
20 dB
Insertion loss
IN
t
OUT:
20 dB (100 kHz to 300 kHz)
IN
t
OUT:
18 dB (300 kHz to 3 GHz)
IN
t
DUT:
1.7 dB
DUT
t
OUT:
16 dB
Max. Power Dissipation:
+26 dBm
Connectors:
N (female)
Accessories supplied:
HZ525 (termination 50 Ω 1 W), N male to N male
(2 pcs.), carrying case
HOO10 | HOO11 | HOO12 Serial Bus Analysis
for all HMO Series Oscilloscopes
HMS Series Spectrum Analyzers
HZ547 VSWR Bridge 3 GHz
Trigger to START condition of I
2
C data
package
HEX decoded CAN bus signal
HMS series
model overview:
HMS3000/3010, HMS1000/1010
HMS1000E
Amplitude measure-
ment range
-114 dBm to +20 dBm
-104 dBm to +20 dBm
Displayed average
noise level
-124 dBm
(-135 dBm with HO3011)
-104 dBm
Resolution
bandwidth
100 Hz to 1 MHz, 200 kHz (-3 dB),
200 Hz, 9 kHz, 120 kHz, 1 MHz (-6 dB)
10 kHz to 1 MHz, 200 kHz (-3 dB)
Video bandwidth
10 Hz to 1 MHz
1 kHz to 1 MHz
Logic probe HO3508 fits to all HMO series
oscilloscopes (also available as
double pack HO3516)
No hardware lock to a specific device
8 logic channels available on each logic probe
Signal threshold adjustable for each logic pod
HO3508 | HO3516 Logic Probe
HMS3000 | HMS3010 - 3 GHz Models
HMS1000 | HMS1010 | HMS1000E - 1.6 GHz Models
Содержание HMO3000 Series
Страница 1: ...Product Overview...
