HAMAR LASER L-705, Руководство пользователя

Страница: 16 / 49

13
The Model R-1307 Readouts
As with all of our laser alignment systems, the A-510 and A-
512 Bore Targets provide live alignment data via our R-1307
readouts. This means once the target is installed in a bore
and you are ready to align it, you just watch the readout
continuously update as you adjust the bore, supporting pillow
blocks or bearing sleeves.
The R-1307 Readouts are simple H & V axis readouts that
are extremely easy to use. There is no complicated software
to learn in order to use the system. However, for those who
want to document the alignment and produce a report, there is
no easier bore alignment program to use than our Bore9
software.
To check for bore angle relative to the centerline, just take a
measurement at the front or back of the bore and any
difference shows the angle. Adjust the front and back of the
bore to read zero and it’s aligned. Also, with our unique design,
our target only needs a few inches of bore width to take a
measurement.
Note: Below is a brief description of The Model R-1307C and Model R-
1307-900/2.4 and R-1307-2.4ZB. For detailed information and instructions
for your specific model, please see Hamar Laser’s R-1307 operations
manual.
Model R-1307C
•
Supports cabled (local) targets only
•
Supports both pulsed-beam and continuous laser modes
•
Functional replacement for the R-307 Analog Readout
Model R-1307-900/2.4 and R-1307-2.4ZB
•
Supports both wireless targets or cabled (local) targets
• Supports both pulsed-beam and continuous laser modes
•
Radio frequency available in either 900 MHz or 2.4 GHz ISM band
• Can also be used as an additional readout to receive data alignment data
transmitted from another R-1307 unit in master (poll) mode.
• The R-1307-2.4ZB can be used with the A-910-2.4ZB Computer Interface
to perform as a wireless readout.
Figure 13 –
A-910-2.4ZB Computer Interface
Figure 11 – R-1307 Readouts
Figure 12-
R-1307KS Readout Stand