Hamamatsu Energetiq LDTLS TLS-EQ-9, Руководство по эксплуатации

Страница: 8 / 31

3
Alternating current
The TLS-EQ-9 is a Class 4 Laser Product. All appropriate laser safety measures should be in place before
operating the system. Consult your facility's laser safety officer. Laser protective eyewear should be worn at
all times while operating the system.
For further safety information, refer to ANSI Z136.1 Standard for Safe Use of Lasers, available from Laser
Institute of America ( www.laserinstitute.org ).
2.3. Laser Information
The TLS-EQ-9 uses a patented* laser drive system to excite a plasma that radiates in the UV as well as the
visible bands. A class 4 laser is located in the Lamp House enclosure. The optical configuration of the
Lamp House ensures that the direct laser beam cannot exit the unit. The EQ-9 laser product is designated
as Class 1 during all normal operation.
The parameters of the non-accessible internal laser are given below in Table 1.
Parameter Value
Wavelength 974 nm
Emission Type CW
Laser Power for classification <8 mW via 7mm measurement
aperture
Beam Diameter ~25 mm at aperture
Divergence >100 mRad
Transverse Beam Mode Diffuse
Table 1 : Embedded Laser Parameters
No regular maintenance is required for the TLS-EQ-9. Any service to the system must be performed only
by factory authorized and trained technicians. To avoid injury, under no circumstances should the user
open or modify the Lamp House or Power Supply Controller enclosure.
The unit must not be operated if the covers are removed or it is defective in any way. Contact Energetiq if
any problems with the equipment are suspected.
* US 7435982, 7786455, 8525138, 8969841, 9048000, 9185786 ; Japan 5410958, 5628253; Korea 10-1507617; UK
GB2450045; others pending