Chapter 4. Installation
EQ-99X Operation & Maintenance Manual
24
of
45
Note
: The tab holes are sized to accept standard ¼"-20 optical bench hardware and spaced to be compatible
with a standard 1” grid mounting hole pattern.
2. Mount the power supply controller to an optical breadboard plate or other suitable mounting structure using
the four supplied holes in the tabs on the bottom of the chassis. Ensure the inlet and outlet air vents of the
power supply controller are not blocked.
Mounting the Power Supply Controller
Figure 13.
3.
Remove the lamp output window cover from the lamp head using an Allen wrench.
4.
Connect the lamp head output to the user equipment. Mount the lamp head so that the lamp output window
is facing outward as shown in the figure below. A pair of pins and a 6-32 threaded hole on the bottom of the
lamp head are available for mounting.
