Hamamatsu ENERGETIQ LDLS EQ-400, Руководство по эксплуатации

Страница: 11 / 25

7
Figure 2: EQ-400 Controller Front
EQ-400 Controller – Front
# Component Description
1 Key switch Enables or disables operation of the lamp. The keyswitch must be in the ENABLE position
for the lamp to operate. The key can only be removed in the DISABLE position.
2 Operation switch Turns the lamp on or off.
3 Status indicator See Table 2 for a list of descriptions
Located on the EQ-400 Controller front panel are LED system status indicators. The function of these
indicators are described below in
Table .
LED Label Meaning (when lit)
POWER OK AC power is connected to the EQ-400 PCU
LAMP ON UV Light is on
LASER ON Laser power is ON and laser light is being produced within the Lamp
REMOTE System is in remote control mode
LASER OVERTEMP Laser internal temperature too high
LASER FAULT Laser module internal fault
PCU FAULT One of the following has occurred in the Controller:
LAMPHOUSE OVERTEMP Lamphouse internal temperature too high
LAMPHOUSE INTERLOCK One of the following has occurred in the Lamp module:
EXTERNAL INTERLOCK External interlock open
COVER INTERLOCK PCU cover(s) not in place
Table 2: Status Indicator LED Functions