Hamamatsu Photonics C15440-20UP Скачать руководство пользователя

Страница: 16 / 70

qCMOS Camera C15550-20UP Instruction manual_Ver.1.0

CoaXPress interface connector 1 - 4 [CoaXPress 1 - 4]

The connector 1 to 4 are connected to the CoaXPress interface connector 1 to 4 on the computer,

respectively.

•

When a connection interface is changed from CoaXPress to USB, and vice versa,

the application software must be closed and the camera must be turned off.

•

Do not connect CoaXPress and USB interface simultaneously.

Trigger input connector [EXT.TRIG]

This is used when the camera is being operated using external synchronization.

Input is TTL or 3.3 V LVCMOS level, and input impedance is 10 kΩ.

When an external trigger is input, the trigger is activated at the falling or rising edge of the signal. (You

can choose external trigger polarity between Negative and Positive.)

Timing out connector 1,2,3 [TIMING 1,2,3]

This is used when peripheral device(s) require synchronization with the camera.

Output is 3.3 V LVCMOS level. Output impedance is 33 Ω.

Note

•

Determine termination according to cable length and so on.

STATUS lamp [STATUS]

The LED indicates status of camera.

Lighting color

Status of power distribution

Turn off (no color)

Power off

Orange (Blinking)

Initialization

Green (lighting)

Power on

Orange (lighting)

Data transfer

Red

(lighting)

Heat up

•

When the camera heats up, stop operation and unplug the

AC adapter immediately.

Power switch [POWER]

The power is turned on/off.

- When the power switch is set to "ON", the camera turns on and starts initialization and the lamp blinks

in orange.

- When the initialization is completed, the lamp color stays in green.

- When the camera transfers data, and the lamp color turns orange.

- When the power switch is set to "OFF", the camera returns to the power off state and the lamp turns

off.

DC power input connector [DC IN]

This is the power supply terminal. Use the accessory AC adapter.

Содержание C15440-20UP







































































Результаты поиска

Содержание C15440-20UP

Отзывы:

Похожие инструкции для C15440-20UP

Бренды по названию

Популярные бренды

Hamamatsu Photonics C15440-20UP, Инструкция по эксплуатации

Результаты поиска

Содержание C15440-20UP

Отзывы:

Похожие инструкции для C15440-20UP

Бренды по названию

Популярные бренды