Hamamatsu Photonics C11440-22CU, Инструкция по эксплуатации

Страница: 58 / 72

C11440-22CU/C11440-22CU01 Instruction manual_Ver.1.4
Camera Link USB 3.0
Exposure time
(Slow scan)
Free running mode 3 ms to 10 s
Free running mode
/ Sub-array mode
129.99 µs to 10 s
External trigger mode 3 ms to 10 s
Conversion factor 0.46 electrons/count (typ.)
Dark offset 100 counts (at Normal readout)
External trigger Function
Edge trigger,
Level trigger,
Synchronous readout trigger,
Start trigger
External signal input
External input
(SMA connector)
(Camera Link)
External input
(SMA connector)
External trigger input level 3.3 V LVCMOS level
External trigger output level 3.3 V LVCMOS level
External trigger delay function 0 µs to 10 s (10 µs steps)
External signal output
Global exposure timing output,
Trigger ready output,
Programmable timing output 1,
Programmable timing output 2,
Programmable timing output 3
(Continuous High or Low output)
Image processing function
Real-time offset correction,
Real-time gain correction,
Real-time defect pixel correction (Default)
Interface
Camera Link Full
configuration
*3
USB 3.0 Super Speed
Lens mount C-mount (C11440-22CU) / F-mount (C11440-22CU01)
*
1 Calculated from the ratio of the full well capacity and the readout noise.
*
2 Digital binning processing in the camera.
*
3 Original mode based on 80 bit mode
(2) Power supply specifications
Camera
Input power supply DC 12 V
Typical output -
Power consumption 55 W
AC adaptor
Input power supply AC 100 V to AC 240 V 50 Hz / 60 Hz 2.5 A
Typical output DC 12 V 8.34 A
Power consumption 70 VA
Note
• Fluctuations of input power supply voltages are not to exceed ± 10 % of
the nominal voltage.
56