36
d
Bedienungsanleitung
Position the camera to view the area in question.
Enter a name for this area in the fi eld
Position name:
and confi rm your choice with
Add
.
You can then select this position in the list of
Available positions
and move the camera to it by clicking
Go to position
.
If you no longer require a certain position, you can select this from the saved list and remove it by clicking
Delete.
When there is more than one position, you can have the camera run through them all, one after the other.
Further information is available in
point 2.3.2 (Tour with user-defi ned sequence).
The system can also run a pre-set camera tour. Further information is available in
point 2.3.3 (Tour with pre-selected sequence).
Click the item
Panning, tilting, zooming
in the menu to access these settings.
2.3.2 Tour with user-defi ned sequence
You need to defi ne a tour if you want the camera to perform it.
Click
Add
to include a new tour,
Change
to alter it and
Delete
to remove it.
Click
Start/Stop
to start or fi nish this tour. After starting the tour, switch to
Camera menu
to watch it.
Adding a new tour:
Click
Add.
The system displays a window in which you can set the parameters for the tour.
First select a
Name
for the tour.
